If the camera fails to respond to the shutter-release button on the WR-T10, reestablish the link between the WR-T10 and the receiver by matching channels and pairing the devices as described below. To erase pairing data, turn the camera on and keep the WR-R10 pairing button pressed for about 3 seconds until the green LED fl ashes rapidly, and then quickly press the pairing button twice before the green LED stops flashing. The green and red LEDs will both fl ash twice simultaneously to show that all pairing data has been erased. Set the channel selectors on both units to the same channel (5, 10, or 15). Devices on diff erent channels can not be paired, while paired devices can only be used together when both are set to the same channel. After turning the camera on, place the two devices close together and press the pairing buttons on both units simultaneously. Keep the buttons pressed until the red and green LEDs on the WR-R10 fl ash on and off in sequence, indicating that pairing is complete. Please contact Nikon Technical Support for help with this question. For information on how to contact Nikon please visit:http://support.nikonusa.com/app/ans...
answered 1 month, 3 weeks ago
1 month, 3 weeks ago